Produsentens beskrivelse:
Due to panel space limitations on the PM MKII, I couldn't include a bunch of Aux Returns. So I've made an expansion so that you have the choice to bring in returns simply to the mix bus.
This module is passive, it does not require power. It simply brings in a return into a pot, and sums it to either the main mix, which is before the Master Insert, or to the balanced outputs, where the MIX IN sums. A toggle switch selects between AUX RET and MIX IN.
Returns works with Channels MKII also – however, it only will sum to the Channels MKII's MIX out.
Impedance: These inputs mix directly into the PM MKII summing nodes. To avoid complication and cost there is no impedance conversion on this module. The input impedance is ~5kΩ, which is 20x lower than normal eurorack. Usually you won't notice because most modules have a low output impedance, but you might notice a lot of attenuation if your source module has an output attenuator that is not at 100%. This won't be an issue for 95% of modules, and it will work with all WMD modules. A mono signal input on L will normal to R.
Connection: RETURNS connects with a single 8 pin 2.0mm ribbon cable. The headers are shrouded, so there is no possibility of messing up the connection.
Alternate panel: All modules ship with an alternate panel and reverse knobs that allow the module to be mounted upside-down.
Vi sender varer hver dag, vanligvis innen 24 timer.
I kassen velger du mellom PostNord MyPack Collect (79,-) og Posten hentested eller levering på døren (199,-). Handler du for over 1 500,- er PostNord gratis. Kabler sendes alltid gratis i Norge.
Til Norden og EU er frakten gratis fra 2 500,-.
